How to use fetal dopplers

I believe you have already know what fetal dopplers are, and benifits of using fetal monitors, or you may check those blogs instead.
So let us just set up and get things done. Before you use a fetal doppler, make sure you have all the supplies nearby.

What You’ll Need

    Fetal doppler
      You will need to decide which fetal doppler is right for you. It's a good idea to just shop at our store. When you have your doppler, ensure the batteries are inserted and the device turns on.
          Ultrasound gel
              Whichever fetal doppler you chose in our store, you will not receive free sample ultrasound gel. However, you can replace it with many kinds of gels.
                  Comfortable place to lie
                      It’s easier to use your fetal doppler when you’re lying down. Use a sofa, bed, massage table or floor mat.
                          Tissues or towel
                              Have tissues or a towel on hand to wipe off the ultrasound gel after you’re finished.
                                Before you attempt to use your fetal doppler, you should know a few things. Firstly, it’s recommended that you wait until 12 weeks of pregnancy to try to hear your baby’s heartbeat. Although it’s possible to hear it starting at 8 weeks, it’s unlikely and waiting may cause you to become impatient or worried.
                                As a general rule, the bigger the baby gets, the easier it will be to hear his or her heartbeat. The sound you hear will also depend on your size and the position of the fetus.

                                How to Use a Fetal Doppler

                                1.     Before you use your doppler, consider that some women report hearing the heartbeat easier in the morning since that’s when the belly is typically the least bloated. Using the doppler while you have a full bladder can also make the heartbeat easier to hear.
                                2.     To start, lie with your back down on a flat surface. Expose your abdomen like you would during a regular ultrasound.
                                3.     Apply a blob of ultrasound gel or other lubricants to your lower belly. Since the gel will reduce static, use a generous amount.
                                4.     Place the doppler probe in the gel and turn the device on.
                                5.     Starting from your pubic bone, gently glide the probe upwards towards your belly button. Slowly rock the probe, covering every part of your stomach so that you find the fetus.
                                6.     If you hear a heartbeat in your earphones and the display shows a heartbeat per minute (BPM) of about 120 or higher, you’ve likely found your fetus. Some women say the sound is similar to galloping horses.
                                7.     If after a few minutes you cannot find your baby, shut the device off and try another time. You may need to wait for the baby to grow bigger or switch positions.
                                8.     After you’re finished, clean off the probe to avoid build up. You may choose to wipe it with 70% ethanol and let air dry or simply wipe it with a clean, dry cloth. Do not submerge the device in water (except waterproof models) or apply cleaning chemicals.

                                Leave a comment

                                Please note, comments must be approved before they are published